Abbasi, Mahdi
The Effects of Homogenizing on the casting microstructure and hardness of GTD111 superalloy [Volume 6, Issue 4, 2017, Pages 25-32]
Abouei Mehrizi, Ali
Synthesis and Characterization of Magnesium Hydroxyapatite Nanopowders for Enamel Remineralization of Initial Caries Lesions [Volume 6, Issue 4, 2017, Pages 1-10]
Afsari Velayati, Mohsen
Evaluation of the Effect of Annealing Temperature on Photocatalytic Properties of TiO2 Nanotubes Modified with Gold and Silver metals [Volume 6, Issue 2, 2017, Pages 9-15]
Afzali, Zahra
Solvent Free Oxidation of Benzyl Alcohol to Benzaldehyde over RuO2/CeO2 Nano-Mixed Oxide [Volume 6, Issue 4, 2017, Pages 47-54]
Aghabarari, Behzad
Solvent Free Oxidation of Benzyl Alcohol to Benzaldehyde over RuO2/CeO2 Nano-Mixed Oxide [Volume 6, Issue 4, 2017, Pages 47-54]
Akbari, Hamid
Functionalized InP/ZnS Quantum Dots Synthesis for Applications in Drug Delivery Systems [Volume 6, Issue 2, 2017, Pages 55-63]
Allah karam, Saeid reza
Synthesis and Characterization of Microcapsules Containing Epoxy Resin (Epon 828) for Self-healing Coatings [Volume 6, Issue 2, 2017, Pages 1-8]
B
Babri, Mehran
Development of Optimized Potentials for Liquid Simulation (OPLS) Force Field to Sulfur Mustard in Order to Study its Adsorption on Graphene [Volume 6, Issue 4, 2017, Pages 33-38]
Badrnezhad, Ramin
Effect of Calcination Temperature and Fuel to Oxidant Ratio for Synthesis of Li Ni0.5Mn0.3Co0.2 Cathode Powder for Li-ion Battery Via Solution Combustion Method [Volume 6, Issue 2, 2017, Pages 25-33]
Bakhshi, Farhad
Synthesis and Characterization of Magnesium Hydroxyapatite Nanopowders for Enamel Remineralization of Initial Caries Lesions [Volume 6, Issue 4, 2017, Pages 1-10]
Basiri, Hamideh
Synthesis and Characterization of Magnesium Hydroxyapatite Nanopowders for Enamel Remineralization of Initial Caries Lesions [Volume 6, Issue 4, 2017, Pages 1-10]
Behnam Ghader, Ali Asghar
Drug Loading and Release Behavior of Graphene Oxide/Magnetite Nanocomposite [Volume 6, Issue 1, 2017, Pages 33-41]
Besharati-Seidani, Abbas
Investigation of Using Nickel Based Conductive Coatings in the Radar Wave Absorbers With Salisbury Screen Structure [Volume 6, Issue 3, 2017, Pages 51-59]
D
Daryani Tabrizi, Mohammad
Synthesis and Characterization of Cerium rich MmNi3.55Co0.75Mn0.4Al0.3 for Ni-MH battery applications [Volume 6, Issue 3, 2017, Pages 9-16]
Davaran, Soudabeh
Functionalized InP/ZnS Quantum Dots Synthesis for Applications in Drug Delivery Systems [Volume 6, Issue 2, 2017, Pages 55-63]
Derakhshandeh, Mohammad Reza
G 292 Osteoblastic Cell Behavior on DLC Coated 316L Stainless Steel for Medical Implants [Volume 6, Issue 2, 2017, Pages 45-53]
Derakhshandeh, Mohammad Reza
The Effect of Sintering Process on Electrical and Microstructural Properties of Barium-Strontium-Titanate Sputtering Target and its Thin Film [Volume 6, Issue 3, 2017, Pages 79-85]
E
Ebadzadeh, Touradj
Slip Casting of Alumina-Fe Composite Under Magnetic Field [Volume 6, Issue 3, 2017, Pages 27-39]
Ebadzadeh, Touradj
Synthesis and Characterization of Cerium rich MmNi3.55Co0.75Mn0.4Al0.3 for Ni-MH battery applications [Volume 6, Issue 3, 2017, Pages 9-16]
Ebrahimi, Izadyar
Investigation of Using Nickel Based Conductive Coatings in the Radar Wave Absorbers With Salisbury Screen Structure [Volume 6, Issue 3, 2017, Pages 51-59]
Ebrahimi, Lelia
Development of Optimized Potentials for Liquid Simulation (OPLS) Force Field to Sulfur Mustard in Order to Study its Adsorption on Graphene [Volume 6, Issue 4, 2017, Pages 33-38]
Ebrahimi, Mehdi
Study of Effects of Copper Content and Cold Work on Microstructure and Aging Behavior of َAl based [Volume 6, Issue 2, 2017, Pages 79-85]
Ebrahimi Sadrabadi, Tahere
Synthesis and Characterization of Microcapsules Containing Epoxy Resin (Epon 828) for Self-healing Coatings [Volume 6, Issue 2, 2017, Pages 1-8]
Esfandeh, Masoud
Dynamic Mechanical Properties of PDLLA/PCL Blends and their Nanocomposites with Bioactive Glass as Nanofiller [Volume 6, Issue 1, 2017, Pages 11-21]
Eshraghi, Mohamad Javad
The Effect of Sintering Process on Electrical and Microstructural Properties of Barium-Strontium-Titanate Sputtering Target and its Thin Film [Volume 6, Issue 3, 2017, Pages 79-85]
Eshraghi, Mohammad Javad
G 292 Osteoblastic Cell Behavior on DLC Coated 316L Stainless Steel for Medical Implants [Volume 6, Issue 2, 2017, Pages 45-53]
Esmaeili, Elaheh
The Synthesis and Investigation of Magnetic Behavior of Magnetite Carbon Nanotubes Nanocomposite (Fe3O4-CNTs) for Water-Based
Convective Heat Transfer Application [Volume 6, Issue 4, 2017, Pages 55-62]
Esmaeilzadeh, Javad
Dynamic Mechanical Properties of PDLLA/PCL Blends and their Nanocomposites with Bioactive Glass as Nanofiller [Volume 6, Issue 1, 2017, Pages 11-21]
Esmaili, Hasan
Kinetic Study on the Effect of PH in the Photocatalytic Degradation of Methylene Blue With Fe-FeS Nanocomposite Powder [Volume 6, Issue 3, 2017, Pages 1-8]
F
Farazi, Reyhaneh
Drug Loading and Release Behavior of Graphene Oxide/Magnetite Nanocomposite [Volume 6, Issue 1, 2017, Pages 33-41]
Farnoush, Hamidreza
Corrosion and Bonding Strength Enhancements in Bioglass Coating on CP-Ti by Using a Combination of Micro-arc Oxidation and Electrophoretic Deposition [Volume 6, Issue 1, 2017, Pages 61-69]
G
Ghaffari Ghods, Somayeh
Slip Casting of Alumina-Fe Composite Under Magnetic Field [Volume 6, Issue 3, 2017, Pages 27-39]
Ghashghayi, Mohammadreza
Investigation of the Effects of SIMA Process on Microstructure and Electrochemical Behavior of Zn Sacrificial Anode in Simulated Sea Water [Volume 6, Issue 3, 2017, Pages 69-77]
Gholampour, Mahdi
Synthesis of the Microwave Absorber Fe3O4/CFs Nanocomposite Via Electrophoretic Deposition With a Wide Effective Absorption Bandwidth [Volume 6, Issue 3, 2017, Pages 17-26]
Ghorbanzadeh, Milad
Effect of Calcination Temperature and Fuel to Oxidant Ratio for Synthesis of Li Ni0.5Mn0.3Co0.2 Cathode Powder for Li-ion Battery Via Solution Combustion Method [Volume 6, Issue 2, 2017, Pages 25-33]
H
Hadavi, Mohammad Mehdi
Dynamic Mechanical Properties of PDLLA/PCL Blends and their Nanocomposites with Bioactive Glass as Nanofiller [Volume 6, Issue 1, 2017, Pages 11-21]
Hadavi, Mohammad Mehdi
Effect of Calcination Temperature and Fuel to Oxidant Ratio for Synthesis of Li Ni0.5Mn0.3Co0.2 Cathode Powder for Li-ion Battery Via Solution Combustion Method [Volume 6, Issue 2, 2017, Pages 25-33]
Hadavi, Seyed Mohammad Mehdi
G 292 Osteoblastic Cell Behavior on DLC Coated 316L Stainless Steel for Medical Implants [Volume 6, Issue 2, 2017, Pages 45-53]
Heidarzadeh, Akbar
Texture Analyses of Friction Stir Welded Single-phase Brass Using Electron Back Scattered Diffraction [Volume 6, Issue 2, 2017, Pages 17-24]
Hesaraki, Saeed
Dynamic Mechanical Properties of PDLLA/PCL Blends and their Nanocomposites with Bioactive Glass as Nanofiller [Volume 6, Issue 1, 2017, Pages 11-21]
J
Jafari, Yaser
Optimization of Porous Structures Based on Polypropylene Fumarate /Hydroxy Ethyl Metacrylate/ Bioactive Glass Prepared by Biomimetic Methods with Mechanical Strength and Surface Morphology Analyses [Volume 6, Issue 4, 2017, Pages 11-24]
Javaheri, Masoumeh
G 292 Osteoblastic Cell Behavior on DLC Coated 316L Stainless Steel for Medical Implants [Volume 6, Issue 2, 2017, Pages 45-53]
K
Kaflou, Ali
Synthesis and Characterization of Cerium rich MmNi3.55Co0.75Mn0.4Al0.3 for Ni-MH battery applications [Volume 6, Issue 3, 2017, Pages 9-16]
Kalantar, Mehdi
Effect of Sintering Temperatures on Mechanical and Electrochemical Properties of Sol–Gel Alumina Coatings Applied on Carbon Steel [Volume 6, Issue 1, 2017, Pages 23-31]
Kalantaripour, Roghayeh
Investigation of Joints Design Geometry Effects on the Microstructural Aspects and Corrosion Mechanism of Weld Metal in the Hadfield Steel Welding Joints [Volume 6, Issue 1, 2017, Pages 71-80]
Kalantaripour, Roghayeh
Investigation of Titanium Effects on the Behavior and Corrosion Mechanism of Hadfield Steel By Using Electrochemical Tests and Electron Microscopy Studies [Volume 6, Issue 4, 2017, Pages 63-71]
Karami, Razieh
Synthesis, Characterization and Electrochemical Performance of Nanostructured Cobalt Oxide and Nickel Cobalt Oxide Active Materials for Supercapacitors [Volume 6, Issue 3, 2017, Pages 61-68]
Kazazi, Mahdi
Synthesis, Characterization and Electrochemical Performance of Nanostructured Cobalt Oxide and Nickel Cobalt Oxide Active Materials for Supercapacitors [Volume 6, Issue 3, 2017, Pages 61-68]
Kazemzad Asiabi, Mahmoud
Synthesis and Characterization of Cerium rich MmNi3.55Co0.75Mn0.4Al0.3 for Ni-MH battery applications [Volume 6, Issue 3, 2017, Pages 9-16]
Khameneh Asl, Shahab
Study of Effects of Copper Content and Cold Work on Microstructure and Aging Behavior of َAl based [Volume 6, Issue 2, 2017, Pages 79-85]
Khanlarkhani, Ali
Development of Optimized Potentials for Liquid Simulation (OPLS) Force Field to Sulfur Mustard in Order to Study its Adsorption on Graphene [Volume 6, Issue 4, 2017, Pages 33-38]
Kivani, Ahmad
Effect of Sintering Temperatures on Mechanical and Electrochemical Properties of Sol–Gel Alumina Coatings Applied on Carbon Steel [Volume 6, Issue 1, 2017, Pages 23-31]
Kolahi, Alireza
Simulation of Texture Evolution during Warm Torsion of IF Steel [Volume 6, Issue 1, 2017, Pages 53-59]
M
Majidian, Hudsa
Slip Casting of Alumina-Fe Composite Under Magnetic Field [Volume 6, Issue 3, 2017, Pages 27-39]
Mashhadi, Mehri
Investigation on Microstructure, Mechanical Properties and Pressureless Sintering Behavior of ZrB2-SiCnano/micron Composites Toughened by AlN [Volume 6, Issue 3, 2017, Pages 41-50]
Mehri, Fatemeh
Studying of the Hydriding Properties of MgH2-10 wt. % (38TiO2-36NiO-26C) Nano-Composite Prepared by Mechanical Milling [Volume 6, Issue 1, 2017, Pages 1-9]
Mirahmadi, Hamid
Effect of Sintering Temperatures on Mechanical and Electrochemical Properties of Sol–Gel Alumina Coatings Applied on Carbon Steel [Volume 6, Issue 1, 2017, Pages 23-31]
Mirzaee, omid
The Effect of Milling Time and Rheological Properties to Achieve the Homogenize Phase and Microstructure of Poly Crystalline Yttrium Aluminum Garnet Ceramic [Volume 6, Issue 4, 2017, Pages 39-46]
Mohammadi, Fatemeh
The Effect of Milling Time and Rheological Properties to Achieve the Homogenize Phase and Microstructure of Poly Crystalline Yttrium Aluminum Garnet Ceramic [Volume 6, Issue 4, 2017, Pages 39-46]
Mohammadi Rahvard, Masoud
Effect of Calcination Temperature and Fuel to Oxidant Ratio for Synthesis of Li Ni0.5Mn0.3Co0.2 Cathode Powder for Li-ion Battery Via Solution Combustion Method [Volume 6, Issue 2, 2017, Pages 25-33]
Molaei, Mohammad Jafar
Drug Loading and Release Behavior of Graphene Oxide/Magnetite Nanocomposite [Volume 6, Issue 1, 2017, Pages 33-41]
Moolyanian, Majid
Investigation of the Effects of SIMA Process on Microstructure and Electrochemical Behavior of Zn Sacrificial Anode in Simulated Sea Water [Volume 6, Issue 3, 2017, Pages 69-77]
Mosalaeipour, Masoud
Effect of Sintering Temperatures on Mechanical and Electrochemical Properties of Sol–Gel Alumina Coatings Applied on Carbon Steel [Volume 6, Issue 1, 2017, Pages 23-31]
Movassagh-Alanagh, Farid
Synthesis of the Microwave Absorber Fe3O4/CFs Nanocomposite Via Electrophoretic Deposition With a Wide Effective Absorption Bandwidth [Volume 6, Issue 3, 2017, Pages 17-26]
Mozafari, Masoud
G 292 Osteoblastic Cell Behavior on DLC Coated 316L Stainless Steel for Medical Implants [Volume 6, Issue 2, 2017, Pages 45-53]
N
Nasiri, Zeynab
Investigation on Microstructure, Mechanical Properties and Pressureless Sintering Behavior of ZrB2-SiCnano/micron Composites Toughened by AlN [Volume 6, Issue 3, 2017, Pages 41-50]
Nemati, Ali
Functionalized InP/ZnS Quantum Dots Synthesis for Applications in Drug Delivery Systems [Volume 6, Issue 2, 2017, Pages 55-63]
Nuranian, Hossein
Evaluation of the Effect of Annealing Temperature on Photocatalytic Properties of TiO2 Nanotubes Modified with Gold and Silver metals [Volume 6, Issue 2, 2017, Pages 9-15]
P
Pazouki, Mohammad
Optimization of Porous Structures Based on Polypropylene Fumarate /Hydroxy Ethyl Metacrylate/ Bioactive Glass Prepared by Biomimetic Methods with Mechanical Strength and Surface Morphology Analyses [Volume 6, Issue 4, 2017, Pages 11-24]
Pourabdoli, Mehdi
Studying of the Hydriding Properties of MgH2-10 wt. % (38TiO2-36NiO-26C) Nano-Composite Prepared by Mechanical Milling [Volume 6, Issue 1, 2017, Pages 1-9]
R
Raeisi Kheirabadi, Noushin
Surface Modification of Carbonaceous Adsorbents for Removal of Nitrate from Water [Volume 6, Issue 2, 2017, Pages 65-77]
Raiesi Goojani, Payam
Investigation of the Effects of SIMA Process on Microstructure and Electrochemical Behavior of Zn Sacrificial Anode in Simulated Sea Water [Volume 6, Issue 3, 2017, Pages 69-77]
Rajabi, Mohammad
Effect of Ce-Ni alloy Addition on Hydrogen Desorption Temperature of Magnesium Hydride-Based Composite Produced by Mechanical Alloying [Volume 6, Issue 1, 2017, Pages 43-52]
Ranjbar Navazi, zahra
Functionalized InP/ZnS Quantum Dots Synthesis for Applications in Drug Delivery Systems [Volume 6, Issue 2, 2017, Pages 55-63]
Rashchi, Fereshteh
Kinetic Study on the Effect of PH in the Photocatalytic Degradation of Methylene Blue With Fe-FeS Nanocomposite Powder [Volume 6, Issue 3, 2017, Pages 1-8]
Raygan, Shahram
Studying of the Hydriding Properties of MgH2-10 wt. % (38TiO2-36NiO-26C) Nano-Composite Prepared by Mechanical Milling [Volume 6, Issue 1, 2017, Pages 1-9]
Riahifar, Reza
Effect of Calcination Temperature and Fuel to Oxidant Ratio for Synthesis of Li Ni0.5Mn0.3Co0.2 Cathode Powder for Li-ion Battery Via Solution Combustion Method [Volume 6, Issue 2, 2017, Pages 25-33]
Rounaghi, Seyyed Amin
Microstructural Evolution of Nanostructured Al-Mg Powder System During Ball Milling and Post Heat Treatment Processes [Volume 6, Issue 2, 2017, Pages 35-43]
Rounaghi, Seyyed Amin
The Synthesis and Investigation of Magnetic Behavior of Magnetite Carbon Nanotubes Nanocomposite (Fe3O4-CNTs) for Water-Based
Convective Heat Transfer Application [Volume 6, Issue 4, 2017, Pages 55-62]
S
Sabzi, Masoud
Investigation of Joints Design Geometry Effects on the Microstructural Aspects and Corrosion Mechanism of Weld Metal in the Hadfield Steel Welding Joints [Volume 6, Issue 1, 2017, Pages 71-80]
Sabzi, Masoud
Investigation of Titanium Effects on the Behavior and Corrosion Mechanism of Hadfield Steel By Using Electrochemical Tests and Electron Microscopy Studies [Volume 6, Issue 4, 2017, Pages 63-71]
Sadati, Mustafa
Synthesis and Characterization of Cerium rich MmNi3.55Co0.75Mn0.4Al0.3 for Ni-MH battery applications [Volume 6, Issue 3, 2017, Pages 9-16]
Saeid, Tohid
Texture Analyses of Friction Stir Welded Single-phase Brass Using Electron Back Scattered Diffraction [Volume 6, Issue 2, 2017, Pages 17-24]
Saeidifar, Maryam
Drug Loading and Release Behavior of Graphene Oxide/Magnetite Nanocomposite [Volume 6, Issue 1, 2017, Pages 33-41]
Salimkhani, Hamed
Synthesis of the Microwave Absorber Fe3O4/CFs Nanocomposite Via Electrophoretic Deposition With a Wide Effective Absorption Bandwidth [Volume 6, Issue 3, 2017, Pages 17-26]
Salman Tabrizi, Nooshin
Surface Modification of Carbonaceous Adsorbents for Removal of Nitrate from Water [Volume 6, Issue 2, 2017, Pages 65-77]
Sangpour, Parvaneh
Surface Modification of Carbonaceous Adsorbents for Removal of Nitrate from Water [Volume 6, Issue 2, 2017, Pages 65-77]
Seifollahi, Masumeh
The Effects of Homogenizing on the casting microstructure and hardness of GTD111 superalloy [Volume 6, Issue 4, 2017, Pages 25-32]
Shahbazi, Sara
Optimization of Porous Structures Based on Polypropylene Fumarate /Hydroxy Ethyl Metacrylate/ Bioactive Glass Prepared by Biomimetic Methods with Mechanical Strength and Surface Morphology Analyses [Volume 6, Issue 4, 2017, Pages 11-24]
Shayegh Boroujeny, Behrooz
Investigation of the Effects of SIMA Process on Microstructure and Electrochemical Behavior of Zn Sacrificial Anode in Simulated Sea Water [Volume 6, Issue 3, 2017, Pages 69-77]
Sheibani, Saeed
Kinetic Study on the Effect of PH in the Photocatalytic Degradation of Methylene Blue With Fe-FeS Nanocomposite Powder [Volume 6, Issue 3, 2017, Pages 1-8]
T
Tajally, Mohammad
The Effect of Milling Time and Rheological Properties to Achieve the Homogenize Phase and Microstructure of Poly Crystalline Yttrium Aluminum Garnet Ceramic [Volume 6, Issue 4, 2017, Pages 39-46]
Tavakoli, Mehrdad
The Effects of Homogenizing on the casting microstructure and hardness of GTD111 superalloy [Volume 6, Issue 4, 2017, Pages 25-32]
Towhidi, Naser
Synthesis and Characterization of Microcapsules Containing Epoxy Resin (Epon 828) for Self-healing Coatings [Volume 6, Issue 2, 2017, Pages 1-8]
V
Vaezi, Mohammad Reza
Drug Loading and Release Behavior of Graphene Oxide/Magnetite Nanocomposite [Volume 6, Issue 1, 2017, Pages 33-41]
Vaezi, Mohammad Reza
Development of Optimized Potentials for Liquid Simulation (OPLS) Force Field to Sulfur Mustard in Order to Study its Adsorption on Graphene [Volume 6, Issue 4, 2017, Pages 33-38]
Y
Youzbashi, Amir Ali
Evaluation of the Effect of Annealing Temperature on Photocatalytic Properties of TiO2 Nanotubes Modified with Gold and Silver metals [Volume 6, Issue 2, 2017, Pages 9-15]
Z
Zahraee, Seyed Mohammad
Evaluation of the Effect of Annealing Temperature on Photocatalytic Properties of TiO2 Nanotubes Modified with Gold and Silver metals [Volume 6, Issue 2, 2017, Pages 9-15]
Zamanyan, Ali
Optimization of Porous Structures Based on Polypropylene Fumarate /Hydroxy Ethyl Metacrylate/ Bioactive Glass Prepared by Biomimetic Methods with Mechanical Strength and Surface Morphology Analyses [Volume 6, Issue 4, 2017, Pages 11-24]
